Brand�� : Kentra
Colour� : Off-White colour (for Soil, Waste & Vent Pipes)
Length� :�Pipes are supplied in lengths of 4m and 6m and plain ended
Nom Size
(mm) |
Outside Diameter (mm) |
���� � Soil, Waste & Vent Pipes����������� |
|
BS 5255 : 1989
MS 1063 : 2002
Thickness (mm) |
BS 4514 : 1983
MS 1063 : 2002
Thickness (mm) |
|
| �32 |
� 36.15 - 36.45� |
�1.8 - 2.2 |
�- |
|
|
�40 |
�42.75 - 43.05 |
�1.9 - 2.3 |
�- |
|
|
�50� |
� 55.75 - 56.05� |
�2.0 - 2.4 |
�- |
|
|
�82� |
�82.40 - 82.80 |
-� |
�3.2 (min) |
|
|
110 |
�110.00 - 110.40 |
- |
� 3.2 (min)� |
|
|
160 |
�160.00 - 160.60 |
�-� |
�3.2 (min) |
|
Abrasion Resistance
uPVC pipes have been subjected to abrasion tests by independent laboratories around the world. Its performance under abrasion is well established and exceeds that of concrete and steel.
East of Installation and Transport
Jointing by solvent cement is effected without the need for special tools. The pipes are easily cut with an ordinary saw to required length for jointing. Its lightweight and good impact resistance makes handling of the pipe and installation very simple.
Features
CP uPVC Soil, Waste & Vent pipes have the following characteristics, which make it ideal for above ground and underground drainage purposes.
��� Chemical Resistance - uPVC is resistant to most alcohols, fats and oils. It is also
�� �resistant to most common corroding agents including acids, alcalis and salts.
��� Smooth Wall - The smooth interior wall of CP pipes provides excellent flow rate due
��� to low frictional resistance. The roughness coefficients for uPVC pipes are as follows:�
����Manning, n����������������� : 0.008 - 0.009
��� Hazen and William, C� : 155 - 160
��� Colebrook-White, K�� : 0.003 - 0.015
|
